China factory cast iron garden lamp post

 Specification introductionHeight6m to 30m or other height customer requirementSuit forElectric Power Distribution Transmission Steel TowerShapeConoid ,Multi-pyramidal,Columniform,polygonal or conicalMaterialUsually Q345B/A572,minimum yield strength>=345n/mm2Q235B/A36,minimum yield st

Featured Products

 Specification introduction
Height6m to 30m or other height customer requirement
Suit forElectric Power Distribution Transmission Steel Tower
ShapeConoid ,Multi-pyramidal,Columniform,polygonal or conical
MaterialUsually Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,
to ST52
Strength2.5KN,5KN,8KN,10KN,12KN
Torlance of the dimenstion+- 2% 
Optical assembly of lighting fixture  IP 65
Electroshock resistant protective grade Grde I
The casing anti-corrosion performance Class II
Working atmosphere of lighting fixture-35 ºC~+45 ºC
 Surface treatment  Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required
Joint of Poles Insert mode,innerflange mode,face to face joint mode
Design of pole  Against earthquake of 8 grade
  Wind Speed160km/hour
Minimum yield strength335mpa
Minimum ultimate tensile strength400mpa
 Max ultimate tensile strength 620mpa
Standard ISO9001 
Length of per sectionWithin 14m once forming without slip joint
WeldingWe has past flaw testing.Internal and external double welding makes the
welding beautiful in shape.
Welding Standard :AWS ( American Welding Society ) D 1.1
 Thickness1mm to 30mm 
PackagesOur poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data.
StyleSize and styles are veriable as per customer request  
Production Process
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages


Yangzhou Shixin Landscape Lighting company is located in Tianshan Industrial Park of Yangzhou, which is the largest and best street light manufacture in China. The company is specialized in production of street light, LED street light, solar street light, pole, high mast, garden light, lawn light and so on. We have 189 workers, 20 technicists, and 25 serve clerks. We have been working in this line from 2004.And we have done many big projects abroad and won good reputation from our customers.

FAQ
1:How many cycles full charge&discharge about your battery?
 In 50% discharging deepness, it can be cycled for 1,200 times; in floating charging and discharging status, it can be cycled for 5000~6000 times. 
2.How to Choose the System Voltage  12V or 24V or for normal street Light ? 
We can design the System for 12v or 24v for solar street Light or 220-380V for normal street light .  
3.What's the main difference between mono and polycrystalline solar panel?
production process and cost. Polysilicon technology is more mature since it is an early technology compared with Monosilicon. 
4.The controller of your solar street light has dual time control function?
our solar charge controller is designed with dual time control function, you can set up the lighting time and divide it into two parts, like 12 hours (6 hours full power lighting + 6 hours half power lighting)

Welcome to contact us a.s.a.p.
Contact person:Dongzhou ZhaoM.B.+8618652772323
 dongzhou.zhao



 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours